Featherweight 18v drive kit


1 in stock

SKU: drivekit18v Category:


2 x  18v TSC 550 rpm drill motor/gearbox and LH M5X20 CS screws suitable for 4s – 6s Lipo.

Grub screws for locking clutch included, or i can lock off the clutches, please contact me on the order or email.

2 x TSC motor mounts with M5 screw insert fixings

2 x heat set 3/8 UNF insert 100mm wheels with bike tyre fitted

2 x Team SC 100a 6s featherweight ESC capable of driving the drill motors.

1x 12awg blade Fuse holder and 2x 40 amp blade fuses (1 as spare)

1x XT60 M+F to fabricate a removable link as required by the UK regulations.
(For higher powered robots, i recommend getting an XT90-S Male and Female connector for use as a link. This adds anti surge protection plus has a higher amp rating. I can also supply these, please email me.

1x 24v 5mm Blue LED light prewired for a basic power active light.


Note image shows drive kit without wheels pictured. The 2nd image shows the type of wheels included. A new image will be uploaded soon.



Additional information

Weight 3000 g